CGE-1 ELECTRIC BIKE CHARGER

CGE-1 ELECTRIC BIKE CHARGER

  • Meanwell Universal Charger
  • 2 stage charging characteristic
  • Universal AC input / Full range
  • Built-in active PFC function, PF>0.90
  • No load power consumption <1W
  • 3 pole AC Inlet IEC320-C14
  • Class I power (with earth pin)
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Cooling by free air convection
  • Fully enclosed plastic case
  • 2 colors LED indicate for charging status
  • Approvals: UL / TUV / CB / FCC / CE
  • 2 years warranty
Categories: ,
ORDER NO. GC220A24-R7B
OUTPUT SAFETY MODEL NO. GC220A24
DC VOLTAGE (Typ.) 27.2V
RECOMMENDED BATTERY CAPACITY 40 ~ 125Ah
CONTINUOS OUTPUT CURRENT (Typ.) 8A
RATED POWER 217.6W
LED INDICATOR Charging(CC) : RED     Floating charging(CV) : GREEN
INPUT VOLTAGE RANGE    Note.3 90 ~ 264VAC     127 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) PF>0.90 / 230VAC PF>0.98/ 115VAC at full load
EFFICIENCY (Typ.) 92.5%
AC CURRENT 4A / 115VAC          2A / 230VAC
INRUSH CURRENT (max.) 120A / 230VAC
LEAKAGE CURRENT (max.) 1.5mA / 240VAC
PROTECTION OVER LOAD 90 ~ 110% rated output power
Protection type : Constant current limiting recovers automatically after fault condition is removed
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 105 ~ 135% rated output voltage
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE 95°C±10°C (TSW1) detect on heatsink of power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT WORKING TEMP. -30 ~ +60°C (Refer to derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +85°C , 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/°C (0 ~ 50°C)
VIBRATION 10 ~ 500Hz, 2G 10min. /1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC SAFETY STANDARDS U1012 (for GC220Axx-AD1 only), TUV EN60950-1 approved
WITHSTAND VOLTAGE I/P-O/P: 3KVAC
ISOLATION RESISTANCE I/P-O/P:100M Ohms/500VDC /25°C / 70% RH
EMC EMISSION Compliance to EN55022 class B, FCC PART 15 class B / CISPR22 class B, EN61000-3-2,3
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
OTHERS MTBF 190Khrs min. MIL-HDBK-217F (25°C )
DIMENSION 210*85*46mm (L*W*H)
PACKING 1.1Kg; 12pcs/14.2Kg/0.73CUFT(GC220Axx-R7B)

1.2Kg; 12pcs/15.4Kg/1CUFT(GC220Axx-AD1)
CONNECTOR PLUG See page 2; Other type available by customer requested
CABLE See page 2; Other type available by customer requested
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

2. This is Meanwell’s suggested range. Please consult your battery manufacture for their suggestions about maximum charging current limitation.

3. Derating may be needed under low input voltage. Please check the derating curve for more details.

4. Constant current operation region is within 50% ~ 100% rated output voltage.

5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.



Send Enquiry

 

We will answer your email within 12 hours!